|
5 Stage Reverse Osmosis Water Filter System With Storage Tank Removes Fluoride |  | Brand: Crystal Clear
Category: Home Improvement
List Price: $259.00
Buy New: $165.00
as of 3/17/2010 21:58 CDT details
You Save: $94.00 (36%)
New (4) from $165.00
Seller: Purenex
Rating:  1 reviews
Sales Rank: 6334
Media: Misc.
ASIN: B002LHDL7E
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Removes chlorine, heavy metals, such as barium, cadmium, chromium, lead and mercury. | | • | NSF listed storage tank | | • | High quality filters for superior performance. | | • | Automatic Shut-Off Valve eliminates waste by closing the feed line when the tank is full | | • | Chrome, long-reach, lead-free faucet. (Meets CA req.) |
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
Five Stage Residential Reverse Osmosis System 100 Gallons Per Day produces pure water fast Most RO's sold in stores locally have only 25 GPD membranes or less!
This system will refill your tank more than twice as fast., system features 5-stages of treatment,
STAGE 1 - 5 micron sediment pre-filtration for mechanical reduction of rust and particulate, and provides membrane protection
STAGE 2 - granular activated carbon pre-treatment filter
STAGE 3 - activated carbon block for reduction of tastes, odors, chlorine, & organic impurities
STAGE 4 - thin film composite Reverse Osmosis Membrane for reduction of dissolved solids, including the range of toxic heavy metals, plus Giardia & Cryptosporidium cysts
STAGE 5 - activated in line carbon post-filtration for final polishing of off-tastes & odors Maintenance:Pre and post filters recommended change every six months for regular usage, or once a year in light usage.
RO membrane: Change recommended based on periodic TDS rejection tests. Typical is every two years.
Warranty: Components are warranted for one year from date of purchase, excluding membrane, pre & post filters.
System comes with complete installation instructions and installation diagram.
System dimensions:
Main unit 18"H X 16"W X 6"D, Storage tank 11" dia. X 15" high, includes auto-shut off, 1/4" tank ball valve, install pack with feed water adapter, drain saddle, storage tank and faucet spout.
Reverse osmosis typically wastes 3 to 4 gallons of water for every gallon it produces.
|
| Customer Reviews:
Great once you have it installed November 3, 2009
Doug Gilbert (Flagstaff, AZ United States)
21 out of 21 found this review helpful
This seems to be a great RO system once you figure out how to install it... The instructions that come with it are pretty poor. If you aren't familiar with a modest amount of plumbing, have someone else install it for you.
A few clues to make this go easier for you:
Not all the fittings that come with the system will necessarily work with YOUR current plumbing.
The color coded tubes didn't match the instructions. This doesn't matter EXCEPT FOR ONE: there is one tube with a little restricted fitting inserted. This is for your waste line. IT IS ABSOLUTELY NECESSARY TO GET THE SYSTEM TO OPERATE! This is what creates the back pressure for the system.
Looking from the front,
Your water input to the filter (from your cold water line) goes to the bottom right fitting (into the first big filter, it is labeled "IN" above the fitting.
Just above that is a "T" fitting, the open port goes to your tank.
They send a shutoff valve that goes on top of the tank that the nylon tube goes into.
On the left side of the membrane (lower horizontal cylinder) are 2 fittings, one used already, the other one goes to your drain (use the saddle valve provided).
The last tube goes on the left side of the top cylinder (your final filter) goes to your faucet.
Tips for your waste line:
IF you use an air gap faucet (required in some places, prevents drain backups from going into the RO system), the drain restrictor won't fit on the faucet end so turn the tube around and have the restrictor in the fitting towards the RO membrane. To use an air gap faucet, you will need to do some creative plumbing to get the different size tube from the faucet to your drain. There are 3 ports on the faucet (1 on a normal faucet), 1 for clean water from your final filter, 1 normal sized coming from your membrane, and one larger tube to go to your drain. I got my faucet at my local plumbing supply house. (Home Depot didn't have one). The air gap faucet does "burble" for a while after using the water but I consider it a small price to pay to make sure my system stays clean.
Tips for starting up your system:
When I first connected my system, I connected the water line to the input. I disconnected the tube from the leftmost carbon filter and attached a different tube and ran it into my sink. I turned the water on and flushed the excess carbon out of the filters for 5 minutes. This way all that carbon didn't get into my tank and RO membrane. I have no evidence, but I believe this will extend the life of my membrane a little. After connecting everything, I turned the system on and nothing came out. It took about 10-20 minutes for the system to build enough pressure to come out of the faucet. I followed the instructions and ran about 10 gallons through the final filter before using the water.
I also added a quick connect "T" in the line going to my faucet AFTER flushing the system of carbon and ran one side to my faucet and the other to my refrigerator so I have clean ice and cold water. I did the flush first so I wouldn't have to flush the carbon through my ice maker for who knows how long. When I replace the final carbon filter, I will disconnect my fridge until after I flush it again.
Also, since you are stripping your water of most or all of the minerals, please get some good quality liquid trace minerals to add back in with every glass you drink. Our bodies are meant to get a significant amount of minerals from our water.
Enjoy!
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. | |
